CADCAMCAE工程应用丛书TRUEGRID和LS-DYNA动力学数值计算详解

1星价 ¥83.3 (7.0折)

2星价￥83.3 定价￥119.0

作者：辛春亮薛再清涂建赵利军刘安阳

出版社：机械工业出版社

本类榜单：工业技术

分类：工业技术 > 机械仪表工业 > 机械设计、计算与制图

买过本商品的人还买了

摆渡人

[英] 克莱儿·麦克福尔著，付强译

¥13.7¥36.0

暂无评论

图文详情

ISBN：9787111632504
装帧：平装-胶订
册数：暂无
重量：暂无
开本：16开
页数：465
出版时间：2019-09-01
条形码：9787111632504 ; 978-7-111-63250-4

本书特色

本书分为两大部分，第壹部分详细讲解了通用参数化网格划分工具 TrueGrid3.13 的使用方法和注意事项，包括 TrueGrid 的基本操作、常用命令详解、建模范例和软件接口等。书中给出了许多建模范例的命令流，建模过程简洁明了，建立的模型网格质量很高。第二部分全面讲解了通用动力学多物理场分析程序 LS-DYNA（版本 10.1）的入门基础知识、侵彻计算、爆炸及其作用分析、裂纹扩展计算、热学计
算、隐式分析、重启动分析、流固耦合、SPH 方法、EFG 方法以及*新的 S-ALE、ICFD、CESE、SPG、Peridynamics、EM、DEM 等新算法，并结合工程应用给出了许多计算算例。对于每个精心准备的算例，详细解释了 TrueGrid 建模过程、相关LS-DYNA 关键字的含义和使用方法及注意事项。全部算例建模步骤简明扼要，参数设置合理，计算结果准确可信。扫描封底二维码可免费下载书中代码。
本书适合理工科院校的大学教师、本科高年级学生和研究生作为有限元课程学习教材，也可以作为工程技术人员的力学分析和产品开发设计的参考手册。通过本书的学习，读者可大幅提高 TrueGrid 和 LS-DYNA 的使用水平及工程分析能力。

内容简介

本书分为两大部分，第壹部分详细讲解了通用参数化网格划分工具 TrueGrid3.13 的使用方法和注意事项，包括 TrueGrid 的基本操作、常用命令详解、建模范例和软件接口等。书中给出了许多建模范例的命令流，建模过程简洁明了，建立的模型网格质量很高。第二部分全面讲解了通用动力学多物理场分析程序 LS-DYNA（版本 10.1）的入门基础知识、侵彻计算、爆炸及其作用分析、裂纹扩展计算、热学计算、隐式分析、重启动分析、流固耦合、SPH 方法、EFG 方法以及*新的 S-ALE、ICFD、CESE、SPG、Peridynamics、EM、DEM 等新算法，并结合工程应用给出了许多计算算例。对于每个精心准备的算例，详细解释了 TrueGrid 建模过程、相关LS-DYNA 关键字的含义和使用方法及注意事项。全部算例建模步骤简明扼要，参数设置合理，计算结果准确可信。扫描封底二维码可免费下载书中代码。本书适合理工科院校的大学教师、本科高年级学生和研究生作为有限元课程学习教材，也可以作为工程技术人员的力学分析和产品开发设计的参考手册。通过本书的学习，读者可大幅提高 TrueGrid 和 LS-DYNA 的使用水平及工程分析能力。

前言

**部分 TrueGrid 软件网格划分指南
第 1 章 TrueGrid 基本操作······················ 1
1.1 TrueGrid 运行模式 ·························· 2
1.2 TrueGrid 设置 ·································· 3
1.3 TrueGrid 快速入门 ·························· 3
1.4 TrueGrid 基本概念 ························ 14
1.5 生成网格的初始命令 ···················· 16
1.6 TrueGrid 建模步骤 ························ 18
1.7 鼠标和键盘快捷键的功能 ············ 18
1.8 显示命令 ······································· 19
1.9 投影和附着 ··································· 19
1.10 蝴蝶形网格划分方法 ·················· 20
1.11 block 和 cylinder 命令练习 ········· 22
1.12 合并 ············································· 26
1.13 回退 ············································· 27
1.14 历史窗口 ····································· 27
1.15 命令执行顺序 ······························ 27
1.16 使用 TrueGrid 软件的其他注意事项·················· 28
1.17 参考文献 ····································· 29
第 2 章 TrueGrid 常用命令详解 ············ 30
2.1 部件（PART）命令 ······················ 30
2.2 几何命令 ······································· 51
2.3 合并命令 ······································· 73
2.4 全局命令 ······································· 82
2.5 输出命令 ····································· 110
2.6 参考文献 ····································· 112
第 3 章 TrueGrid 建模范例·················· 113
3.1 钢壳结构水下爆炸模型 ·············· 113
3.2 炸药自由场爆炸二维轴对称模型 ·············································· 114
3.3 炸药自由场爆炸三维 1/8 对称模型 ·············································· 115
3.4 刚性弹体三维全模型 ·················· 116
3.5 装药弹体二维轴对称模型 ·········· 118
3.6 装药弹体三维 1/4 对称模型 ······· 119
3.7 二维轴对称多层靶模型 ·············· 121
3.8 半无限靶三维 1/4 对称模型 ······· 122
3.9 复合靶三维 1/2 对称模型 ··········· 124
3.10 带 20°倾斜角的靶标三维 1/2对称模型 ···································· 125
3.11 带中心孔的靶标三维1/2对称模型 ············································· 129
3.12 射流侵彻二维轴对称模型 ········ 129
3.13 爆炸成形弹丸三维 1/4 对称模型 ············································ 131
3.14 破片战斗部模型 ························ 132
3.15 钢筋混凝土模型 ························ 136
3.16 SPH 模型 ··································· 139
3.17 远场水下爆炸声固耦合模型 ···· 139
3.17.1 球形水域模型 ·························· 140
3.17.2 椭球形水域模型 ······················· 141
3.18 行星齿轮模型 ···························· 144
3.19 自行车车轮模型 ························ 145
3.20 随机块石层模型 ························ 147
3.21 参考文献 ···································· 148
第 4 章 TrueGrid 支持的分析软件和软件接口 ··································· 149
4.1 TrueGrid 软件与 AUTODYN 软件接口 ·············································· 149
4.2 TrueGrid 软件与 LS-DYNA 软件接口 ·············································· 149
4.3 TrueGrid 建模与 LS-DYNA 计算直通算例 ······································ 150
4.4 参考文献 ······································ 161
第二部分 LS- -DYNA 动力学数值计算详解
第 5 章 LS- -DYNA 软件简介 ··············· 162
5.1 LS-DYNA 基本功能 ·················· 162
5.2 LS-DYNA *新发展 ·················· 167
5.3 LS-DYNA 资源网站 ·················· 172
5.4 参考文献 ····································· 172
第 6 章 LS- -DYNA 入门基础知识 ········ 173
6.1 单位制 ········································· 173
6.1.1 力学单位 ··································· 173
6.1.2 热学单位 ··································· 173
6.1.3 电磁学单位 ······························· 174
6.2 LS-DYNA 关键字输入数据
格式 ·············································· 175
6.3 LS-DYNA 主要关键字简要
介绍 ·············································· 178
6.4 LS-DYNA 常用命令行语法 ······· 185
6.5 求解感应控制开关 ······················ 186
6.6 文件系统 ····································· 188
6.7 重启动分析 ································· 189
6.8 单精度和双精度 ·························· 190
6.9 隐式分析和显式分析 ·················· 190
6.10 接触 ··········································· 191
6.11 Lagrangian/Euler/ALE 算法 ······ 199
6.11.1 三类算法简介 ·························· 199
6.11.2 Euler/ALE 算法常用关键字 ······· 200
6.11.3 PART 和 AMMG 的区别 ··········· 213
6.12 流固耦合算法 ···························· 213
6.13 关键字文件的分割和编辑 ········ 218
6.14 批处理运行 LS-DYNA ············· 219
6.15 参考文献 ··································· 220
第 7 章侵彻计算 ··································· 221
7.1 泰勒杆撞击刚性墙计算 ·············· 221
7.2 弹体侵彻多层楼板计算 ·············· 225
7.3 楔形体入水二维计算 ·················· 243
7.4 参考文献 ····································· 250
第 8 章爆炸及其作用计算 ··················· 251
8.1 水中爆炸气泡脉动一维计算 ······ 251
8.2 爆炸成形弹丸侵彻钢板二维ALE 计算 ····································· 260
8.3 空中爆炸二维到三维映射计算 ·· 266
8.4 含铝炸药水下冲击起爆二维计算 ·············································· 274
8.5 参考文献 ······································ 285
第 9 章裂纹扩展计算 ··························· 286
9.1 采用节点分离方法模拟钢球撞击铝板 ······································ 287
9.2 用单元失效删除和带有损伤的本构模型方法模拟弹体侵彻混凝土 ·························· 290
9.3 用 SPH 方法和带有损伤的本构
模型方法模拟水射流冲蚀煤层 ··· 296
9.4 钢板裂纹扩展二维XFEM 计算 ··· 300
9.5 金属切削 SPG 计算 ···················· 307
9.6 爆炸作用下玻璃破碎的近
场动力学计算 ······························ 314
9.7 参考文献 ····································· 323
第 10 章热学计算 ································· 324
10.1 热学计算基础 ···························· 324
10.2 长杆瞬态热传导计算 ················ 327
10.3 厚板稳态对流计算 ···················· 331
10.4 空心柱体热应力计算 ················ 335
10.5 厚板辐射传热计算 ···················· 340
10.6 水成冰相变计算 ························ 343
10.7 参考文献 ···································· 346
第 11 章隐式分析 ································· 347
11.1 隐式分析基础 ···························· 347
11.2 简支方板特征值分析 ················ 353
11.3 简支方板受力振动计算 ············ 356
11.4 轴向加载薄壁壳体屈曲分析 ····· 361
11.5 金属切削 EFG 计算 ·················· 365
11.6 参考文献 ···································· 373
第 12 章 S- -ALE/ICFD/CESE/EM/
DEM 算法介绍 ······················· 374
12.1 水下爆炸 S-ALE 计算 ·············· 374
12.2 绕柱流 ICFD 计算 ····················· 384
12.3 激波管 CESE 计算 ···················· 388
12.4 涡电流 EM 计算 ························ 393
12.5 电磁轨道炮发射 EM 计算 ········ 397
12.6 料仓落料 DEM 计算 ················· 405
12.7 参考文献 ···································· 410
第 13 章重启动分析 ····························· 411
13.1 小型重启动分析 — SHPB
计算 ············································ 412
13.2 完全重启动分析 — SHPB
连续打击计算 ···························· 417
13.3 参考文献 ···································· 421
第 14 章若干计算问题的解决方法······ 422
14.1 求解算法的选择 ························ 422
14.2 关于计算结果的准确性和可
信度的讨论 ································ 422
14.3 LS-DYNA 求解时间的决定
因素 ············································ 423
14.4 减少 LS-DYNA 求解时间的
方法 ············································ 424
14.5 LS-DYNA 求解中途退出的
原因和解决办法 ························· 424
14.6 沙漏出现的原因和控制方法 ···· 426
14.7 质量缩放 ···································· 427
14.8 六面体单元中的负体积现象 ···· 428
14.9 负滑移能（接触能） ················ 429
14.10 参考文献 ·································· 430
第 15 章 LS- -DYNA 前后处理软件
LS- -PrePost 简介 ···················· 431
15.1 界面布局 ···································· 432
15.2 鼠标与键盘操作 ························ 433
15.3 主菜单 ········································ 433
15.4 页（Page） ································ 436
15.5 动画控制 ··································· 442
15.6 渲染热键 ··································· 443
15.7 通用选择界面 ···························· 445
15.8 LS-PrePost 命令行和批处理 ···· 446
15.9 常用后处理操作举例 ················ 447
15.10 参考文献 ·································· 454
附录 ·························································· 455

展开全部