工程制图(英文)

Chapter 1 Basic Drawing Knowledge and Skills 1.1 Drawing Tools and Usage 1.2 Sheet, Line type, Font and Dimension 1.3 General Steps of Architectural Drawing 1.4 Freehand Drawing Chapter 2 Basic Concept of Projection 2.1 Concept and Method of Projection 2.2 Basic Properties of Orthographic Projection 2.3 Three-plane Projection System and Three-plane Projection of Solids Chapter 3 Projection of Point, Line and Plane 3.1 Projection of Points 3.2 Projection of Straight Lines 3.3 Projection of Planes Chapter 4 Relative Position of Straight Line and Plane, Plane and Plane 4.1 Parallelism between Staright Line and Plane and Parallelism between Plane and Plane 4.2 Intersection of Straight Line and Plane, and Intersection of Plane and Plane 4.3 Perpendicularity to Line (Plane) and Plane 4.4 Comprehensive Prolems of Spatial Geometric Elements Chapter 5 Projectiou of Planar Solid 5.1 Three-plane Projection of Plane Solid 5.2 Drawing Points on the Surfaces of Planar Solid 5.3 The Intersection of Planes with Planar Solid 5.4 The Intersection of Straight Line with a Planar Solid 5.5 The Intersection of Two Planar Solids Chapter 6 Regular Curves, Curved Surface and Curved Solid 6.1 Regular Curves and Curves Commonly Used in Engineering 6.2 Curved Surfaces on a Basic Curved Stereo 6.3 Basic Curved Surface Stereo 6.4 Projection Analysis of Intersection Line Between Plane and Curved Surface or Curved Surface 6.5 Projection Analysis of The Intersection Point Between a Straight Line and a Curved Surface 6.6 Projection Analysis of the Intersection Line Between Plane Solid and Curved Solid 6.7 Projection Analysis of the Intersection Line Between Curved Solid and Curved Solid Chapter 7 Axonometric Projection 7.1 Basic Knowledge of Axonometric Projection 7.2 Isometric Projection 7.3 Oblique Axonometric Projection 7.4 Axonometric Projection of Coordinate Circle Chapter 8 Combined Geometry 8.1 Drawing of the Combined Geometry View 8.2 Dimensions of the Combined Geometry View 8.3 Reading of the Combined Geometry View Chapter 9 Drawing Method 9.1 Profile and Cross Section 9.2 Sectional Drawing in Axonometric Drawing 9.3 Simplified Drawing Chapter 10 Buileiing Construction Drawings 10.1 Overview 10.2 General Building Plan 10.3 Floor Building Plan 10.4 Building Elevation